$12.49
The best hardline fitting ever made, period. The patent-pending Optimus gasket design is exponentially stronger than any o-ring design ever made. Our 1/8" (3.2mm) thick gasket provides huge surface area to clamp the hard tubing.
With ultra-precision machining, extreme corrosion resistant Pro-XE nickel, plasticizer-free o-rings and super clean looks, Optimus fittings are so good we back them with a 10 year warranty.
SIZING:
ORDERING:
Collections: Fittings, Products
Type: Fitting
Category: Fitting, Nickel, Satin Nickel, Soft Tubing, spo-default, spo-disabled, spo-notify-me-disabled
THE ULTIMATE
HARDLINE FITTINGS
FLEX COMPRESSION FITTINGS
BULLETPROOF DESIGN FOR PREMIUM BUILDS
REVOLUTIONARY
GASKET DESIGN
Hard line builds look amazing, but rigid fittings are a source of weakness and the #1 source of leaks and catastrophic failures. While o-rings are appropriate for G 1/4" threading, o-rings simply aren't able to provide the necessary holding force for rigid tubing.
The Optimus patent-pending gasket design features a far higher surface area along the rigid tube, providing vastly stronger clamping force. With Optimus fittings, the hard tube is very difficult to pull out by hand, and virtually leak proof in typical liquid cooling builds.
OPTIMUS HARDLINE FITTING ASSEMBLY:
FLEX COMPRESSION FITTINGS
BULLETPROOF DESIGN FOR PREMIUM BUILDS
OPTIMUS GASKETS VS. LEADING HARDLINE FITTING O-RINGS:
OUR HISTORY OF
AEROSPACE COMPONENTS
With over 50 years machining fittings and components for aerospace, medical, and heavy machinery (including the original lunar rover), Optimus fittings define new standards in PC water cooling. Read our history here.
Fittings are the most critical but the least sexy of PC parts. But a loop is only as good as the lowest quality component. Unfortunately, we found even the most expensive fittings on the market are substandard, not meeting G ¼” spec and, worse, not even rated for water.
The highest end precision CNC lathes allow Optimus's thread accuracy down to achieve perfection down to 0.0002”, far beyond any other fitting available. And this is for the first and 1000th fitting, not just the first off the line. We constantly calibrate and double check our precision. After all, our aerospace and medical customers demand the best, so should liquid cooling.
This means that Optimus G ¼” threads are crafted to the ISO-228 BSPP-G specification. Not “g ¼ style” like many fittings in the industry. Does this matter? Definitely. If you’ve run into fitting leaks, acrylic breaking or other system gremlins, it’s typically due to poor precision and uncalibrated CNC machines. We’ve seen expensive blocks where the accuracy of the threads was so off that the fitting had to be cross threaded (aka forced new threads) into the port to even get it to go in.
O-rings seem like a small detail, but are critically important for PC loops. We only use US-made EPDM o-rings with zero plasticizer added. EPDM is the industry standard, and the most bulletproof PC tubing is matte black EPDM. Plasticizer was common in clear tubing to make it flexible, but disintegrates and turns into loop gunk. In the last few years, tubing manufacturers have worked to eliminate plasticizers in tubes, but plasticizers can still be found in o-rings. Common o-ring materials like nitrile (aka buna-n and NBR) and viton can contain plasticizers. And often need lubricating oil to fit correctly into blocks, a major source of fluid gunk buildup. You'll notice this oil leaching in GPUs. Moreover, parts with no-name o-rings in funky colors are seriously problematic. Colored silicon o-rings, moreover, are very fragile. Using pure EPDM is more difficult requiring the parts to have higher accuracy, but the benefits are loops free from contaminants.
Pro·XE
NICKEL PLATING
Extreme corrosion resistance, excellent thermal properties and a lifespan measured in decades. Optimus Pro-XE Nickel is a true professional finish for ultra performance PCs.
Flaking, disintegrating nickel is a widespread problem in liquid cooling. After all, nickel PC fittings and blocks prohibit use with plain water, or you void the warranty. Instead, you must use anti-corrosive fluids to protect nickel components Why? Because the industry standard electroplated (aka electrolytic) nickel is a cosmetic nickel finish that isn't meant to be used in liquid applications. Often called chrome or shiny nickel, electroplated nickel is cost effective and looks good.
Unfortunately, water, anti-fungals and fancy fluids, including opaques, will rapidly strip electroplated nickel. The gunk that will appear in block fins isn't just broken down fluid, it's often disintegrated nickel, paint and cheap plastics. If this seems crazy, it is. After all, the cheapest home faucet can handle tap water, so why can’t expensive PC fittings survive basic H2O?
Alas, eletroplated nickel is the PC industry standard. What's the solution?
Optimus parts are finished with only industrial-grade extreme corrosion resistant nickel, called PRO-XE electroless nickel.Electroless is an aerospace industry finish with extreme chemical resistance, hardness and superior fluid lubricity. So why isn't everyone using electroless? Cost and appearance. Electroless is far more difficult to manufacture, especially when achieving perfect finishes needed for premium PC builds. And electroless can't achieve that easy chrome look of electroplating, which is why electroplating is the industry standard, even if it shouldn't be used.
Aside from reliability, electroless nickel is able to withstand saltwater, corrosive chemicals and, yes, even plain water.With Optimus, you can use distilled water without fear of flaking. Distilled, aside from being cheap, is also the highest performance coolant readily available. Anti-corrosive additives lower the thermal conductivity of the liquid.That's why we can offer a 10 year warranty, even with regular H2O. It has been a herculean task to create Optimus's electroless products, but the results look great and are nearly indestructible.
